This isn't required, but each server and client computer must be able to connect to each other to share files, and to resolve all DNS names and Active Directory information for the domain. Network requirementsĪll server and client computers referenced in this guide are on the same subnet. This guide is a proof-of-concept guide that has detailed instructions for installing Hyper-V. For instructions on how to enable Hyper-V on Windows 10, see the Verify support and install Hyper-V section in the Windows 10 deployment test lab guide. If you don't have access to a Hyper-V server, you can install Hyper-V on a Windows 10 or Windows 8.1 computer temporarily to use for building reference images. If you use a computer with a single system partition (C:), you'll need to adjust some procedures in this guide to specify the C: drive instead of the D: drive. MDT01 and HV01 should have the ability to store up to 200 GB of files on a data drive (D:). For example, PC0003 and PC0004 are running Windows 7 just like PC0002, but are used for Configuration Manager refresh and replace scenarios, respectively. The device names are incremented for clarity within each scenario. PC0003 - PC0007: These are other client computers similar to PC0001 and PC0002 that are used in this guide and another guide for various scenarios. This computer is referenced during the migration scenarios. PC0002: A computer running Windows 7 SP1 Enterprise 圆4, fully patched with the latest security updates, and configured as a member in the domain. PC0001: A computer running Windows 10 Enterprise 圆4, fully patched with the latest security updates, and configured as a member in the domain. Several client computers are referenced in this guide with hostnames of PC0001 to PC0007. See Hyper-V requirements below for more information about HV01.HV01 is a Hyper-V host computer that is used to build a Windows 10 reference image. This server is located on a different subnet than MDT01 and has a different default gateway. A second MDT server ( MDT02) configured identically to MDT01 is optionally used to build a distributed environment for Windows 10 deployment.MDT01 will host deployment shares and run the Windows Deployment Service. MDT01 is a domain member server in with a data (D:) drive that can store at least 200 GB. You can use an earlier version of Windows Server with minor modifications to some procedures.ĭC01 is a domain controller, DHCP server, and DNS server for, representing the fictitious Contoso Corporation.Network and serversįor the purposes of this article, we'll use three server computers: DC01, MDT01, and HV01.Īll servers are running Windows Server 2019. The procedures in this guide use the following names and infrastructure. It covers the installation of the necessary system prerequisites, the creation of shared folders and service accounts, and the configuration of security permissions in the file system and in Active Directory. This article will walk you through the steps necessary to prepare your network and server infrastructure to deploy Windows 10 with the Microsoft Deployment Toolkit (MDT).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |